ArcadeLB

Iron

|

Arcade

Iron

Tarbiaat Products

Iron Facades

Laser-cut screens, perforated panels and fabricated steel that give buildings privacy, shade and a signature look.

2-5 mmTypical sheet thickness for cut screens
30-50%Open area for shade and airflow
DuplexGalvanized plus powder coated steel
Any patternCut from your CAD drawing

Choose the right system

Four ways to build it. Pick a type to see how it works, where it fits best and what it includes.

Why choose Iron Facades

Privacy that still breathes

Screens hide balconies and windows from view while air and light pass through.

Shade that cuts heat

A metal skin in front of the glass blocks direct sun before it reaches the facade.

A signature facade

Your own pattern, logo or calligraphy, cut from a CAD drawing.

Built against corrosion

Galvanizing under powder coat lasts far longer than either coating alone.

Strong and secure

Welded steel gates, railings and guards made to measure.

Side by side

The highlighted column follows the type you selected above.

Laser-Cut Decorative ScreensPerforated Metal PanelsWrought Iron & Fabricated SteelCorten Steel Cladding
MaterialMild steel or aluminiumSteel, aluminium or stainlessGalvanized mild steelWeathering steel
LookBespoke patternsUniform or graded holesClassic or modernRust coloured patina
Privacy and shadeHigh, set by the patternSet by open areaLow to mediumSolid cladding
MaintenanceLow with duplex coatingLowLow with duplex coatingLow, plan for runoff
Relative costMediumMediumMediumHigh

Options and finishes

Materials

  • Mild steel
  • Hot-dip galvanized steel
  • Aluminium, lighter and rust free
  • Stainless steel 304 or 316
  • Corten weathering steel

Finishes

  • Hot-dip galvanizing
  • Duplex: galvanizing plus powder coat
  • Powder coating in any RAL colour
  • Corten-look and wood-effect coatings
  • Natural patina on Corten

Fixings and extras

  • Steel sub-frames and brackets
  • Stainless steel fixings
  • LED backlighting
  • Hinged or sliding screen panels
  • Drainage details for Corten

From survey to handover

Survey

We visit the site, measure the openings and walls, and check the fixing points.

Design

Pattern development, shop drawings, panel layout and fixings checked for wind load.

Fabricate

Sheets are laser cut, folded and welded, then galvanized and powder coated.

Install

Our crews fix the sub-frames and panels, align patterns across joints and touch up finishes.

Handover

Final inspection, care guidance and aftercare support.

Questions clients ask

Still unsure which system fits? Send us your drawings or a photo of the opening.

Is it really iron?

Modern iron facades are almost always steel or aluminium. Traditional wrought iron is rarely made today. We choose the metal that suits the load, weight, location and budget.

Will it rust?

Bare mild steel rusts, so we hot-dip galvanize it and powder coat on top. This duplex system lasts much longer than either coating alone. Aluminium and stainless steel do not rust.

Steel or aluminium?

Steel is stronger and suits gates, railings and heavy screens. Aluminium is about a third of the weight and rust free, which suits large facade panels and coastal sites.

Can you cut my own pattern?

Yes. Send a sketch, image, logo or CAD file. We adjust it so the solid bridges between cuts stay strong enough for the panel size.

Is Corten right for my building?

Corten looks best where it can dry between wet spells. It stains nearby surfaces with rust runoff in the early years, and humid salty coastal air can stop the patina from stabilising. In those cases we recommend a Corten-look powder coat.

How do I maintain it?

Wash the panels with water from time to time, check the coating for damage and touch up any scratches so the steel stays protected.

Planning a project?

Share your drawings or opening sizes and we will recommend a system and prepare a quotation.